Hot Products

 

1.Before cleaning the trough or bucket, be sure to turn off the power supply, unplug the plug. Wash the bucket every 1 to 2 months. When cleaning, unscrew the cap of the bucket, add warm water, properly add citric acid or scale remover, then dissolve the limescale 10 minutes later, and then rinse the bucket with clear water.

 

2.Wash the trough (recommend to wash once in one or two weeks in the northern region)

Add warm water into the trough, then add an appropriate concentration of 50-70% acid solution or scale remover, and dissolve the limescale 10 minutes. Scrub the atomizer and the surface of the inner wall with cotton swabs or soft cloth, then wash with tap water.

 

3. Outside Cleaning: Scrub the surface limescale with soft cloth.

 

a. Please use clean water instead of dirty water, and the water can not be very hard. Less calcium.

 

b. Draining the water in the tank if you do not use it for long time.

 

c. Clean the mist module often with soft brush and clean water.

 

d. If the fog is decreasing, we suggest you replace the mist modules.

 

l The compressor turns itself on three minutes after turning on the dryer.

 

l The ideal temperature for the dryer to work in is from about +5℃ up to about +32℃.

 

l When the device defrosts the cooling fan works properly but the inserted compressor switches itself off.

 

l It is recommended to clean the filter once a month. Carefully clean it with clear warm water.

 

l Leave a safe distance between wall and air in- and air outlets.