Textile Industry can control the use of ultrasonic humidifiers
The Textile Industry is probably one of the earliest industries to control its production environment. Especially after the excessive flow to the electrification production, many careful people have found that knotting, flying flocs and sand appear in the process of textile processing and production. The unevenness of the line will become lower as the relative humidity in the air increases. Later, after practice, the main reason was caused by static electricity. Of course, the current level of technology to solve static electricity only needs to humidify the air, so the humidifier has become a particularly important machine in the textile factory production process.
The occurrence of static electricity is mostly in the case of relatively dry air. The occurrence of this phenomenon can be said to be very troublesome for the production and processing of Textile Industry. It not only affects normal production to a certain extent, but also has certain harm to the quality of finished textiles. It also hurts the health of the assembly line workers. According to the relevant data, when the humidity is maintained at 60%-80%, it is most suitable for production work. When it is lower than 60%, the environment needs to be humidified, otherwise it will cause many problems, such as static electricity and yarn moisture regain. It's low, and there will be bad things like flying flowers and broken ends.
When there was no humidifier long ago, people began to use steam to humidify the textile production workshop, mainly to avoid a series of hazards caused by air drying. In order to ensure normal production, only the workshop can be humidified. The efficiency of sprinkling water on the ground or putting bucket water is too slow. It can only be selected to humidify it with boiler steam, but the boiler burns not only pollutes the environment but also consumes a lot of energy. Because the cost is too high, the humidifier is quickly eliminated after it comes out.
Of course, the type of humidifier is also different depending on the humidification principle, such as wet film humidifier, ultrasonic humidifier, etc. Most of the textile workshops are ultrasonic humidifiers. What advantages does the ultrasonic humidifier have to be seen by many Textile Industry? What about it?
The ultrasonic humidifier uses the equal humidification technology. The wet film humidifier is also applicable to this technology. From the perspective of energy saving and environmental protection, the energy consumption of these humidifiers is not much different. However, the excessive volume of the wet film humidifier does not meet the conditions of use of the Textile Industry, because the same humidification effect requires more space and power, so that only the ultrasonic humidifier can be selected.
The ultrasonic humidifier has the advantages of simple installation and convenient operation, and only needs to set relevant parameters in the control panel, and the required space is also small, the atomized particles are also small, and can be moved so that local humidification can be performed. Because of its excellent humidification efficiency and small size, it is very popular among many Textile Industry.
