Why does the humidifier perform differently under the same amount of humidification?
The amount of humidification refers to the performance of a humidifier for a certain period of time, usually expressed in kilograms per hour, that is, the amount of water consumed by the humidifier in one hour, that is, if you buy a 5 kg The humidifier means that the humidifier consumes 5 kilograms (liters) of water per hour. Of course, sometimes the water consumption of the humidifier will vary from environment to environment. For example, in winter, the water consumption may be less than 5 kg, but it will not be very different, and vice versa, summer. Although the water consumption will be high but it will not be too different, all the standards are based on the environment in which the humidifier is located.
However, in reality, many companies will find that the water consumption of the humidifier they buy will be very low. For example, the 8 kg humidifier may only consume 5 kg of water, and some even less, then the humidifier is a poor quality product. Or you are fooled by the manufacturer during the purchase process, and the product sold by the manufacturer is used to pretend to be a small product.
As I have encountered such a thing before, a customer called us and said that the spray effect of our 9 kg humidifier is different from that of others. The effect is much better, the spray is foggy, the same area In the workshop, we use our humidifier to achieve the humidification effect in one hour, but other brands of humidifiers take one and a half hours or even two hours. In this case, we can only tell the customer that you have bought the humidifier. It must have been fooled. Because the customer will definitely not do the experiment after purchasing the humidifier, it takes an hour to see if it can consume 9 kg of water. Because the humidifier is a good thing, as long as the time is sufficient, it can achieve the humidification effect in the closed space. Therefore, customers must be careful when choosing a humidifier.
In addition to the temperature affecting the humidification effect, the design problem will also affect the humidification effect. For example, if the mist exit is small, or the fan is not completely aligned with the mist outlet, the wind will be insufficient and the mist will not completely scatter into the air, because the mist will form water and then drip back into the tank of the humidifier. The humidification effect is inevitable.
There is also the use of the atomization plate is not good quality, the atomization plate is the main equipment of the humidifier, the humidification performance, if the use of low-quality atomization plate, then you can not blame the humidification performance is not good. This is what the manufacturer of inferior raw materials produces. Moreover, the atomizer plates produced by the same manufacturer are also different. For example, there are 6 atomization holes, and 8 of them are, so it is sure that the atomization performance of the 8 atomization holes is good. When reacting to the humidifier, it is to use 8 holes of fog. The humidification performance of the plate is better.
Therefore, when purchasing a humidifying machine, you must ask how many atomizing plates are used by the manufacturer, and what is the fogging amount of the atomizing plate, and whether the power value is greater than or equal to 900W. These can be confirmed before the purchase, and finally I wish you to buy a satisfactory humidifier.
