Printing factory warehouse moisture-proof specific method
At present, most of the southern part of China says that it is not only wet all year round, especially when it comes to the continuous rains of the southern and plum rain seasons. The humidity contained in the air can be felt without the use of instruments. This environment is not only People's lives are inconvenient and have a great impact on many companies that need a dry environment. Because it is damaged during the process of production or storage. In particular, most of the printing houses are paper products. Once they encounter the environment with excessive humidity, they will directly affect the printing quality and physical properties. Therefore, it is recommended that the printing manufacturer be equipped with an industrial dehumidifier in the workshop or warehouse to reduce the damage caused by the environment to your company.
1, the placement needs to be neat: generally speaking, the paper and the product should be neat, must be placed in a suitable position, as far as possible to leave a large gap between the cards, in order to facilitate air circulation. It is not advisable to have no gaps between the piles and the plates. If the paper gets wet, there is no room for recovery. The weather is fine, the outdoor air humidity is lower than the air humidity of the warehouse, and it is necessary to open the window to speed up the indoor air circulation and discharge the moisture in the warehouse.
2. Check the card regularly: Some cards will be damaged during use, so that the paper will be in direct contact with the ground, so it will absorb the ground gas and cause the paper to get wet. The height of the card board is also particular, the height must be more than ten centimeters, and the material of the card board is also required. It is best to use a whole piece of flat plate, which can reduce the contact between the paper and the moisture to achieve the moisture-proof effect.
3, the film should be surrounded: we know that some products have higher requirements, in order to protect it will be a film, which requires tightness, not only a thin layer, so it can not protect against moisture And the card should also be surrounded by the film, in order to maximize the barrier between water vapor and paper. Moreover, if the whole board of paper is not used up, it should be sealed with a film in time to reduce the contact time between the paper and humid air.
4, control the air humidity: we know that the warehouse is relatively closed, fewer windows, so the warehouse needs ventilation equipment, such as exhaust fans, of course, can also prevent lime, moisture absorbent and other things that can be dehumidified to prevent moisture Air damages the paper. Of course, it is best to configure the dehumidifier. This is a professional equipment for dealing with dampness. It adopts the technology of freezing and dehumidification. The dehumidification speed is fast, the operation is simple and convenient, the moisture can be well protected, the air humidity is reduced, and the warehouse of the printing factory is always dry. Paper and print will not be affected by moisture.
There are many ways to protect the warehouse warehouse from moisture. The above mentioned are just some of the most common methods. If you have any different opinions or better opinions, please leave a message to discuss. In short, no matter what kind of moisture-proof method is used, it is more convenient to configure an industrial dehumidifier in the warehouse or workshop. Its main function is to control the humidity in the air. You only need to set it up, you can not manage it very conveniently. CONLOON dehumidifier, the first choice for moisture protection in the printing house warehouse.
