240L Duct Dehumidifier

Parameters

Products shows

Warehouse moisture-proof tips!

The placement should be neat: generally, the paper and the product should be neat, and must be placed in a proper position. There should be a large gap between the plates to facilitate air circulation. It is not advisable to have no gaps between the piles and the plates. If the paper gets wet, there is no room for recovery. The weather is fine, the outdoor air humidity is lower than the air humidity of the warehouse, and it is necessary to open the window to speed up the indoor air circulation and discharge the moisture in the warehouse.

Regularly check the card: Some cards will be damaged during use, so that the paper will come into direct contact with the ground, so it will absorb the ground gas and cause the paper to get wet. The height of the card board is also particular, the height must be more than ten centimeters, and the material of the card board is also required. It is best to use a whole piece of flat plate, which can reduce the contact between the paper and the moisture to achieve the moisture-proof effect.

The perimembrane should be surrounded: we know that some products have higher requirements. In order to protect it, it will need to be surrounded by a film. This requires tightness, not only a thin layer, so it can not protect against moisture. Moreover, the card should be enclosed when the film is enclosed. Only in this way can the contact between water vapor and paper be blocked to the utmost. Moreover, if the whole board of paper is not used up, it should be sealed with a film in time to reduce the contact time between the paper and humid air.

Control the air humidity: We know that the warehouse is relatively closed and there are fewer windows, so the warehouse needs ventilation equipment, such as exhaust fans, and of course, it can prevent lime, moisture absorbent and other things that can be dehumidified to prevent humid air. Paper damage. Of course, it is best to configure the dehumidifier. This is a professional equipment for dealing with dampness. It adopts the technology of freezing and dehumidification. The dehumidification speed is fast, the operation is simple and convenient, the moisture can be well protected, the air humidity is reduced, and the warehouse of the printing factory is always dry. Paper and print will not be affected by moisture.

Hot Tags: 240l duct dehumidifierChina, manufacturers, suppliers, factory, wholesale