Contact Us
- No.116, Changda Rd, Yuhang District, Hangzhou, Zhejiang, China
- eva@conloon.com
- +86-571-81600072
Dehumidifier For Paper
Micro-computer humidity setting, automatic induction, automatic control.
Description
Dehumidifier For Paper








Dehumidifiers are so important to the paper industry
At present, the processing requirements of the workshop are getting higher and higher, especially the control of humidity is strict. Some parts are manufactured even if the parts manufactured by the humidity pass are effective, so the dehumidification of the workshop is more important. The dehumidifier is A common tool in the workshop, of course, you must also master the correct method of use, so dehumidification will be more effective.
At present, the domestic cigarette package printing process is becoming more and more complicated. Most of the flexible packaging uses single-sided coated paper; bar and hard bags often use white cardboard and transfer laser paper, especially some high-grade cigarette packets, which will take more A combination printing method and various anti-counterfeiting technologies. Low-end cigarette packets also use gray-white paper. Such a large number of papers with different thicknesses and different specifications will have a significant impact on the quality of the final printed product due to changes in printing pressure and changes in ambient temperature and humidity during the printing process. Therefore, it is necessary to ensure accuracy in the control of humidity.
The impact of environmental changes on cigarette package printing is mainly due to the following reasons:
1. Characteristics of paper: the hysteresis effect of paper moisture content. The relative humidity of the original storage environment of paper A is relatively high, and the relative humidity of the original storage environment of paper B is relatively low. When the two kinds of paper are placed in the same environment as the raw materials for the printing of cigarette packets, the paper A will be wet, and the paper B will absorb moisture, but When this dehumidification and moisture absorption reach an equilibrium state, the water content of the paper cannot be restored to the original level, which is due to the hysteresis effect of the paper moisture content. Understanding this feature will enable us to properly understand the relative humidity control of the warehouse environment using a warehouse dehumidifier or workshop dehumidifier in the raw material storage work, and improve the warehouse management system. Most cigarette pack printing companies control the paper storage environment at a temperature of 20 to 25 degrees and a relative humidity of (60 ± 5)% RH. In this environment, the storage state of the paper is relatively stable.
2, paper is a very hydrophilic material, paper moisture absorption, is the main cause of paper curl deformation. Experiments have shown that when the relative humidity of the environment is below 80%, the humidity fluctuates by 10%, and the equilibrium water content of the paper changes by 1%; when the relative humidity exceeds 80%, the equilibrium water content changes by about 1.5 to 2.0%. This means that in the case of high humidity conditions, small changes in humidity will cause a sharp increase in paper deformation and a strong destructive power.
3. The printing of cigarette packets from paper to finished products will have a process from the paper factory to the factory, printing paper products, printing and processing, and then to the finished product. Among them, the influence of time span and geographical location is relatively large. The storage of paper products in the warehouse before the printing of cigarette packets is a buffer zone for the paper to adapt to the local environment temperature and humidity of the cigarette printing enterprises. At this time, the storage conditions of the warehouse are very important, and it is necessary to control the temperature and humidity of the warehouse environment air. During the storage of the paper, the process of moisture absorption and dehumidification is within the adjustable range of monitoring. Avoid “flank edges” due to moisture absorption, because “wetting” occurs due to moisture release, and the front and back sides of the paper may also be curled due to the degree of humidity being affected.
Hot Tags: dehumidifier for paperChina, manufacturers, suppliers, factory, wholesale
You Might Also Like

















