Metal Shell Commercial Air Drying Dehumidifier

Handle Metal Shell Commercial Air Drying Dehumidifier

Features

1.Proflute rotor,washable,10 years lifetime;

2.Equipped with an electric PTC regeneration heating;

3.Strong and robust construction with 1.2mm thickness;

4.Double layers heater box,Armstrong insulation is used to avoid heat loss and condesation;

5.SCR(silicon controlled rectifier) constant temperature controling system ensures inside temperature constant and promise the reliable and stable performance ;

6.Front & Back access door design for easier maintenance and troubleshooting;

7.Process air inlet and dry air outlet located at the same side for easier installation;

8.Customized filters,G4 efficiency;

9.Auto stop protection function for Rotor;

Maintenance

1. The air inlet and outlet of the dehumidifier should not be blocked by obstructions, and the filter net should be cleaned.

2. The wheel dehumidifier should be placed in the center of the room.

3. The condenser should be cleaned from time to time and kept clean.

4. If the humidity in the air is less than 30%, it is too dry and uncomfortable, so the reliable humidity controller should be controlled to maintain it at 50% to 60%. When using, the doors and windows are closed as much as possible to achieve a good dehumidification effect in the room. The body should be placed flat, not tilted or slanted to avoid machine malfunction or abnormal noise.

5. When the ambient temperature is lower than 15 °C, the water droplets attached to the surface of the evaporator will freeze and the effect of the dehumidifier will be weakened. If the ambient temperature exceeds 40 °C, the pressure in the system will increase and the compressor will be overloaded. The protector should cut off the line or the compressor motor will be damaged. Therefore, the optimum operating temperature range of the dehumidifier is 15 °C ~ 40 °C.

6. If the water storage capacity in the dehumidifier is too full, in order to avoid spilling the dirty ground, you must unplug the power cord and then pour off the water in the water tank when transporting the body during operation.

7. The rotary dehumidifier regularly cleans the filter gas network (about once every two weeks) to maintain the dehumidification, dust removal efficiency and life of the machine. Clean the filter gas net to wash with water below 40 °C; use detergent to clean better, wash off the dust, rinse with water, dry it and put it back into the body. When cleaning the body, wipe it gently with a damp cloth; avoid direct splashing of water to avoid damage to electrical insulation. There are adhesives on the surface of the body, which can be washed with soapy water to avoid spraying with gasoline, petroleum spirit, solvent or spray insecticide to avoid peeling or discoloration. Do not use thin rods or wires to pry the inside of the machine to avoid malfunction or danger.

8. The reel dehumidifier should be statically placed for four to six hours before being moved. The compressor line in the dehumidifier contains cold coal. After moving, the cold coal must return after four to six hours. In situ.

9. When the power is off or not used for a long time, please unplug the power cord to maintain the life of the machine.

Benefits of using a dehumidifier

First, the dehumidifier can effectively protect household appliances, computers, cameras, instruments and equipment from moisture damage. ;

Second, it can effectively and quickly dry the wet clothes. When it encounters the wet weather, the wet clothes will not be dry for a few days, and the dehumidifier will be fully dry overnight.

In wet seasons or in humid environments, dehumidifiers are good assistants to help you get rid of moisture.

Third, it can effectively prevent household items, food, medicines, books and mold and deterioration. ;

Fourth, it can effectively lower the humidity inside the room, make the human body feel comfortable, reduce the occurrence of rheumatism, arthritis, neuralgia, bronchitis, asthma and other diseases;

5. It can effectively reduce the growth of mold and other bacteria. The environment with high humidity is a hotbed for rapid propagation of various bacteria. If the humidity is below 60%, bacteria and harmful microorganisms will be significantly reduced.