+86-13819126663
Temperature And Humidity Controller

Temperature And Humidity Controller

Temperature And Humidity Controller

Description

Temperature And Humidity Controller

Model

CLTW-240E

Dehumidify capacity

L/H

10

Applying area

m2

120-200m2(height:3m)

voltage

V

380V~50 Hz

Cooling capacity

K w

12

Rated current

A

9.0

Rated power

K w

4.12

Air volume

m3/h

1800

Heating dispatch air

m3/h

4500-6000

Dimension (L*W*H)

mm

Indoor machine:790*470*1720 /outdoor machine:1100*350*800

Noise

dB

≤60

Air inlet&outlet way


Front air inlet . Top air outlet

Correctly adjust the humidity of the dehumidifier: When the user adjusts the set humidity of the dehumidifier, the humidity should be set according to the actual feeling of humidity, the number of people in the space, and the size of the space. Usually, in the state of less activity such as rest and sleep, the relative humidity of the room is around 60% RH, and the human body will feel more comfortable. The humidity setting is too low, except that it will make people feel dry. Because of the large difference in humidity between indoor and outdoor, the moisture is expanded faster, which causes the compressor to start and stop frequently, which shortens the service life of the dehumidifier and consumes more. More energy.

Regularly clean the dehumidifier: Regularly remove the filter from the dehumidifier for cleaning, which can effectively improve the dedusting effect of the dehumidifier and improve the ambient air quality. Regularly cleaning the heat sink of the outdoor unit can effectively improve the heat transfer coefficient and heat exchange efficiency, and improve the working efficiency of the dehumidifier.

Regularly let the professional check the dehumidifier: After the long-term use of the dehumidifier, the electrical circuit and control components in the unit will have different degrees of aging, which will cause serious damage to the unit and the human body. Regularly let the professional circuit on the dehumidifier Inspection, replacement of aging components, replenishment of refrigerant, can prevent component aging from harming the machine and the human body, and can keep the dehumidifier in good working condition.

If the dehumidifier is not used for a long time, it should be protected. When the dehumidifier is not used for a long time in winter or outside, apply a protective cover to cover the dehumidifier to avoid sun, rain and dust deposition, which may cause difficulties in cleaning and maintenance in the future.

Dehumidifiers are widely used in life and are very popular among consumers. We should pay attention to the internal sanitation of the dehumidifier when using the dehumidifier daily, because the air comes out from the inside of the dehumidifier. If the inside of the dehumidifier is dirty, the air coming out will be unclean and the human body will be susceptible to infection. Therefore, the dehumidifier must be cleaned and maintained.

Install method

This machine has fan, does not need to connect with pipe

Running method

It has micro-computer control, could controlled by setting value,when the temperature and humidity reaches the setting value, the machine will stop. Also could controlled by manual.

Running protection

Total automatic running. With temperature, humidity display and failure code display. 3 minutes delay to protect the compressor. Over-heating production function etc.

Temperature And Humidity Controller


Hot Tags: temperature and humidity controllerChina, manufacturers, suppliers, factory, wholesale

Send Inquiry

(0/10)

clearall