3KG Mushroom Planting Ultrasonic Humidifier

Parameters

Characteristics

1. The chassis is made of pure stainless steel, and it is non-corrosive and non-rusting.

2. The internal integrated atomization module is adopted, and the replaceable module can be replaced with a chip, which is simple in maintenance and low in maintenance cost;

3. The relative humidity can reach 99%, the humidity can be adjusted and controlled, and the control range can be set according to the site conditions;

4. Intelligent and accurate humidity control, digital display, using world-class humidity probe, control accuracy is above 3%;

5. It is easy to install, flexible to move, and can also be installed on the outer wall.

6. Humidity automatic control, can set working time control, can be manually controlled, and choose according to your conditions;

7. The humidifier is internally graded with waterproof appliances, each of which has undergone a strict permeable test;

8. Water shortage self-protection, over-pressure self-protection

9. The fogging particle diameter is only 1-10μm, small and uniform, the gasification effect is good, and the humidification space does not produce water accumulation;

Product images

Company introduction

FAQ: The ultrasonic humidifier indicator is on but the meter is not showing

Maintenance method:

1. Check if the connecting cable behind the instrument panel is loose.

2. The instrument controller is faulty and the instrument is suggested to be replaced.

FAQ: Ultrasonic humidifiers sometimes trip when turned on

Maintenance method:

1. The power plug is not grounded to cause a trip.

2, matching air switch is too small, 3kg-9kg with 15A or 12kg-21kg with 32A or 24kg-30kg with 55A or so, the above models are more than 60A, depending on the working conditions.

Hot Tags: 3kg mushroom planting ultrasonic humidifierChina, manufacturers, suppliers, factory, wholesale