6KG Mushroom Humidifier

The 6KG Mushroom Humidifier adopts automatic humidity control, random display of humidity, and can adjust the range of humidity control arbitrarily. After setting, the humidity will automatically stop when it reaches the set value, and the humidity will automatically start when it is lower than the set value

Parameters

The principle of 6KG Mushroom Humidifier

The piezoelectric ceramic piece (commonly known as the atomizing piece) is installed at the bottom of a water container, and a driving voltage is generated by a driving control circuit to match the resonance frequency of the atomizing piece, and the atomizing piece generates an oscillation energy. . The oscillating energy propagates in the water in a direction perpendicular to the surface of the atomizing sheet. At a suitable water depth, the water surface on the energy propagation axis is concentrated to swell a water column. A large number of tiny tension waves are concentrated in the front end of the water column, causing the water surface to rise. The surface tension is greatly reduced. The water surface is split into many tiny areas by the wavelength of the surface tension wave. Each area seems to be a single particle independently of each other and is emitted into the air to form a fog.

Product images

Company introduction

FAQ: Water leakage at the overflow of the ultrasonic humidifier (overflow)

Maintenance method:

1. Clean the water level switch of the water tank.

2. There is foreign matter in the water inlet solenoid valve, remove the solenoid valve spool or replace the water inlet solenoid valve.

3. The water inlet float valve is broken or re-adjusted

Hot Tags: 6kg mushroom humidifierChina, manufacturers, suppliers, factory, wholesale