Ultrasonic Mist Generator

Mist maker uses Copper cover with Stainless steel.

China Wholesale 7L Per Hour Stainless Steel Body Mist Maker

Reliable and durable

With special design, easy to replace the ceramic disc.

Features:

1.Stainless steel shell waterproof and heat radiation.

2.Improved Integrated Oscillation circuit with stable performance for protection of water shortage, over current, over temperature and interference.

Parameters:

Detailed Images

Need to pay attention to these points when installing the humidifier

The humidifier also needs to be installed? Isn't the humidifier not available for purchase and can be used? Unless it is a split humidifier, if it is the whole, is it not placed directly indoors? In fact, this idea is a mistake, because there will always be some special occasions of the humidifier can not be placed with the humidification environment. So which places can the humidifier not be installed indoors?

1. The air humidity is kept in 80% or even more than 90% environment, such as aging room. In order to simulate high humidity environment, the air humidity of the aging room is generally controlled above 80%. In such a humid environment, the humidifier is placed inside. If it is easy to rust, so in order to ensure that the humidifier can be used for a few more years, it is better to place it outside the aging room.

2, flammable and explosive occasions. For example, oil and gas depots and chemical product warehouses. If humidification is required in these occasions, the humidifiers are preferably placed outdoors. Because of the many electric sparks allergies in these occasions, the electrical appliances used in these areas need to be equipped with explosion-proof equipment. Of course, if The humidifier itself has been installed with an explosion-proof device, and that doesn't matter.

3, cold storage, fresh storage: in these places, due to the low temperature, the humidifier also needs to be installed outdoors, because the low temperature will cause the water in the water tank to freeze, the other is that the low temperature will also cause the humidification effect to decline, so it can only be placed outdoors .

4, indoor dust is very large: if the humidifier is not used to remove static electricity but used to reduce dust, then the humidifier can not be installed indoors, need to be installed outdoors, because the dust once into the water tank, block the atomization hole, Will cause a decline in humidification performance.

Of course, there are other environments where the dehumidifier needs to be placed outdoors. Everyone should carefully consider it according to their own environment, but the average company does not need to consider so much. After determining the placement place of the dehumidifier, it is the design of the fogging pipe: if there is a high-speed airflow source in the humidification place, such as various high-speed fans, various gas injection ports, etc., the fogging pipe at this time The road port should be disposed below the airflow source, and the outlet is upward, so that the high-speed airflow source can be uniformly vaporized and diffused; if the airflow is relatively stationary in the humidification site, it is considered to lengthen the connection and the fogging pipeline in the humidification site. The mist outlet port is uniformly distributed, and each mist branch port is inclined at an angle of 30 degrees to the horizontal, so that the humidified water mist is naturally floated and vaporized.

Hot Tags: Ultrasonic Mist GeneratorChina, manufacturers, suppliers, factory, wholesale