Stainless Steel Body Mist Maker

China Supplier 7L Per Hour Waterproof Mini Humidifier

Mist maker uses Copper cover with Stainless steel-stainless steel body mist maker.

Reliable and durable

With special design, easy to replace the ceramic disc.

Features:

1.Stainless steel body mist maker, waterproof and heat radiation.

2.Improved Integrated Oscillation circuit with stable performance for protection of water shortage, over current, over temperature and interference.

Warm tips:

a. Please use clean water instead of dirty water, and the water can not be very hard. Less calcium.

b. Draining the water in the tank if you do not use it for long time.

c. Clean the mist module often with soft brush and clean water.

d. If the fog is decreasing, we suggest you replace the mist modules.

Parameters:

Detailed Image

What are the common faults of the humidifier?

The humidifier is also called an humidifier. It is an electrical device that can increase the humidity in the room. It is mainly used in a dry climate. For example, in the north of China, many people use it to humidify the room to ensure the house. Air humidity is not too low; many companies also buy for a variety of reasons, such as it can be used to prevent static electricity, so as to ensure smooth production. But as long as there is something wrong with things, there will always be such a fault or something like that. What are the common humidifier failures?

1. The fan sound becomes louder and does not turn: the fault occurs because the motor becomes loose, and the wind wheel does not match the air duct. Therefore, the wind resistance becomes larger and the sound becomes larger. Just fix the fan again and match the wind wheel to the air duct.

2, the spray nozzle drip of the humidifier: This is caused by insufficient atomization, or the reason that the spray port is too small, especially when the opening on the pipe is too small, it is easy to occur. This can be avoided by simply expanding the pipe opening. Of course, there is also the aging of the atomized sheet. The aging of the atomized sheet will lead to an increase in the atomized particles, so that it will condense into water when it is not as good as vaporization, so that it is inevitable that the spray port will drip. At this time, it is necessary to replace the atomized sheet. .

3, the water tank leaks: the water tank leakage is mostly caused by poor bonding and loose fitting of the water cover, or at the time of installation, due to the unreasonable cooperation between the water tank and the base, the water tank is inconvenient, which will cause the water tank to leak This problem must be paid attention to during installation. It is best to use a tapered fit.

4, humidity sensor failure: There are many reasons for this failure, the most common is the loose contact of the power line, there is a large change in the external temperature, resulting in allergies of the humidity sensor. Therefore, it is necessary to take note of the use of industrial humidifiers to control the temperature of the humidification environment.

5, the body leaks, or leaking fog. The leakage of the fuselage mainly changed into the air outlet dripping, and the fog leakage of the fuselage was caused by the improper setting of the water level and the water outlet, and the fog was not sealed. This requires a reasonable arrangement of the direction of the fog to ensure that the effect of the wind in the wind is reduced to the outburst, rather than leaking out of the fuselage.

There are many reasons for the malfunction of the humidifier, especially industrial humidifiers, some are caused by loose parts, and some are caused by improper installation. No matter what the fault is, there are solutions to it. Some glitch users can solve it. If it can't be solved, then contact the manufacturer for repair, don't tamper with it. Otherwise, the humidifier will be aggravated, and the impact will still be your own.

Hot Tags: stainless steel body mist makerChina, manufacturers, suppliers, factory, wholesale