Industrial Ducted Dehumidifier 240L Per Day

Industrial Ducted Dehumidifier 240L

Product Parameters

Recommended apllied area: 200-300m2(height about 3m).

Display mode: Liquid crystal humidity RH10-90% is displayed randomly.

Humidity control: Microcomputer control, humidity 1%, free setting and control (the computer board is equipped with power failure memory function).

Frost function: Microcomputer intelligent control, automatic defrosting, low temperature applicable.

Compressor: International brand low noise reciprocating compressor, low noise, reliable operation.

Power supply: 220V power supply, with the compressor three-minute delay protection, sensor failure indication error code and other devices.

Cooling system: Adopting high efficiency copper clad aluminum sheet heat exchanger, the heat exchanger has compact structure, good pressure resistance and high heat exchange efficiency.

Wind machine design: The air volume is large, the friction is small, the noise is small, the service life is long.

Drainage way: continuous drainage with pipe.

Move mode: A mounting bracket is installed at the bottom (see the back figure).

Product Display

Ducted Dehumidifier for Clean Factory

Due to the high technical requirements, the dust-free space is mostly suitable for dust-free space because it is mostly equipped with a dehumidifier. The dust-free space excludes particles, harmful air, and bacteria in the air within a limited space. And control the temperature, cleanliness, indoor pressure, air flow and air distribution, noise vibration and lighting, static electricity. It is a special place, also known as a clean factory. Among them, closely related to our dehumidifier industry is the humidity of the air. Because the humidity of the air has some effect on the room:

1. Some items in the dust-free space tend to absorb moisture in the environment with high humidity, thus deforming and deteriorating. Therefore, continue the dehumidifier to ensure that the humidity in the air is kept at a reasonable standard.

2. There must be metal objects in the dust-free space, the humidity is too large and too humid, the metal will be damp and will be corroded

3. The first two points is the problem caused by the humidity of the air too much, the same air humidity is too small, that is, the air is too dry is not enough. If the air in the clean room is too dry, it is easy to cause static electricity.

4. Since it is a workshop, there must be workers in operation. Scientific research has shown that our human body is comparable in air humidity between 40% and 60%. The air humidity is too high, people's skin may be allergic to eczema, will be listless, wilting; the air is too dry, it will induce various respiratory diseases.

5. The dust-free workshop is not an aseptic workshop. It is necessary to maintain a good air humidity in the clean room. Studies have shown that bacteria and other biological pollution can actively multiply in an environment with a relative humidity of more than 60%. Some bacteria can grow when the relative humidity exceeds 30%, which shows the importance of controlling humidity.

With the high air quality requirements of the workshop, it is imperative to install a pipeline dehumidifier or a constant temperature and humidity machine in a clean room. The principle of the pipeline dehumidifier is to use the evaporator to reduce the temperature while recovering the heat of the system to make up for the lost heat. The energy is rationally utilized and energy-saving.

Installation of Ceiling Mounted Dehumidifier

Installation Instruction

Contact Us

If you have any questions or inquiry, please feel freely to contact us at: sales@conloon.com

Hot Tags: industrial ducted dehumidifier 240l per dayChina, manufacturers, suppliers, factory, wholesale