Efficient Industrial Dehumidifier

Main Features:

• DAIKINcompressor.

• Environmental friendlyrefrigerant.

• 3 minutes delay for protecting the compressor.

• Coloris optional.

• Inside active carbonfiltermesh.

• Power failure protection.

• Auto re-start if power failure

• 24 hours a day working is available.

• 4 casters for easy moving.

• Micro computer control and high quality humidity sensor for accurate humity probing.

• Low noise .

Product Parameters:

Product Display:

Why the Refrigerant Dehumidifier Will Frost?

The general ambient temperature range of the dehumidifier is between 5 ° C and 38 ° C. After the ambient temperature is lower than 20 ° C, frost or ice will appear, which will cause confusion for many users. In fact, the most effective use environment temperature range of the dehumidifier is 20 °C-38 °C, and the ambient temperature is lower than 20 °C. Under the influence of air temperature, air humidity and dehumidifier working conditions, there will be frosting. And icing. Generally, the refrigerating dehumidifier has the function of “automatic defrost” in the control part. When the ambient temperature is lower than 20 °C, it will automatically run “automatic defrost”, which is about 10 minutes per hour. When the frost is too thick, the circulation air volume of the dehumidifier is affected, the dehumidification efficiency is lowered, and the defrost time is prolonged under the control system of the dehumidifier. The cause of the frosting of the dehumidifier is too thick. In addition to the ambient temperature factor, there are several abnormal conditions as follows:

1.The filter dust is too thick, the dust is too thick, and there are obstacles in the air inlet and outlet, which affects the circulating air volume of the dehumidifier, and frost or ice will form on the evaporator. Solution: Clean the dust and ensure the air inlet and outlet. Normal air circulation.

2.The fan of the dehumidifier is faulty, the motor burns, jams, the wind leaves are too dusty or the motor starting capacitor is broken. Solution: Replace the motor, clean the blades or replace the starting capacitor.

3.The evaporation pressure of the fluorine leakage system of the refrigeration system becomes low, and frosting or icing may occur. Solution: leak detection, repair welding, evacuation and fluoride.

4.Dehumidifier defrosting temperature control circuit failure, troubleshooting method: replace the defrosting temperature probe or replace the main control board.

Contact Us for Price:

Hot Tags: efficient industrial dehumidifierChina, manufacturers, suppliers, factory, wholesale