Industrial Pool Dehumidifier

Industrial Pool Dehumidifier

Dehumidification of swimming pool, bathroom and sauna

With the continuous improvement of people's living standards, people have put forward higher requirements for the environment of swimming, sauna and other leisure places. How to control the temperature and humidity of the air in the swimming pool has long been a problem. The wet air not only makes people feel wet and uncomfortable, but also causes serious corrosion to the buildings and decorations in the museum. In the past, it has been to increase the number of ventilation and to add a lot of fresh air to improve the air quality in the hall. However, a lot of ventilation, taking away not only a large amount of water vapor, but also took away a lot of heat energy contained in the steam.

A medium-sized swimming pool evaporates about 1 metric ton of water per day. If it is not effectively removed, it will be detrimental to the building structure. In addition, people who are active at the pool will feel uncomfortable. These will affect the income of the pool. The relative humidity should be controlled below 65%.

The swimming pool is a place with high energy consumption, and the running cost is very important. The moisture absorber dehumidifier not only successfully controls humidity, but also saves about 50% in operating costs compared to other systems.

The water used in the indoor swimming pool is tap water. The disinfection of tap water is carried out with chlorine-containing bleaching powder. In order to ensure the cleanliness of the water, the water needs to be disinfected every day. All the disinfecting measures use chlorine-containing products. Therefore, when the surface of the indoor swimming pool evaporates, the indoors will be filled with a large amount of chloramine/trihalomethane, which has a stimulating effect on the human body and seriously endangers human health. Among them, trihalomethane can cause cancer!

The indoor swimming pool operates in all seasons. According to foreign research data, more than 90% of the heat loss in the swimming pool is caused by evaporation of the swimming pool surface. Most of this energy is in the form of pool air in the form of water vapor (hidden heat).

In the traditional ventilation and dehumidification mode (national standard: the indoor area of the swimming pool with 4 times the air volume), the “hidden heat energy” in the swimming pool will be discharged to the outside in the spring, autumn, and winter, resulting in the thermal energy in the swimming pool. A lot of losses, and in the summer will cause a lot of loss of cold in the pool.

The large amount of evaporation of indoor water vapor will cause the room to be filled with moist air containing chlorine. When the air cools, it will condense into water droplets. The chlorine-containing water droplets show acidity, which will cause corrosion to the building. If it is serious, it will lead to the house. collapse.

The most comfortable air humidity in the human body is in the range of 45% to 65%. If the swimming pool is too large, the environment of the swimming pool will be very humid, which will cause water vapor and condensation to drip, making the swimmer feel uncomfortable. This will cause consumers to not come back again. People come to swim indoors to enjoy, not to suffer.

In this case, the anti-corrosion dehumidifier can be perfectly solved. The anti-corrosion dehumidifier will discharge dry air after absorbing the humid air, and the temperature of the air will be higher than the temperature of the room, so that the heat energy in the swimming pool will not be lost, so that the building will not be corroded and damage. After reducing the air temperature, swimming in the indoor swimming pool will feel comfortable and will not affect people's health.

Anti-corrosion dehumidifier product advantages:

1. The structure of the whole machine is reasonable: adopt the “Intelligent Fan Delayed Shutdown” system, humidity setting and automatic control. The machine is equipped with humidity and temperature display. The humidity is set from 30% to 90%. When the set humidity is reached, it will automatically stop. When the humidity is higher than the set humidity, it will be automatically turned on and dehumidified. (When the humidity is set, the machine will automatically sense. Air, automatically turn on when wet, automatically shut down when air is dry, automatic control)

2. 1-24 hours free timing, self-test fault function: go out and rest assured, time switch function, 1-24 hours setting, convenient for you to shut down when you go out, no need to watch automatic induction, dehumidification. The machine has automatic fault detection function. If the fault occurs, the machine will automatically detect the cause and display the corresponding fault code for easy maintenance.

3. The internal thread copper tube design: the material is sufficient, the heat dissipation is good, the service life is long, and it is not easy to corrode.

4. User-friendly design and operation: hose connection, automatic drainage, eight-wheel bearing universal wheel design.

5. Power-off memory function: power-off memory function, once set, the machine automatically switches the machine, once the power is cut off, such as after the call, it will automatically start, no need to manually boot.

6. LG brand compressor: service life of up to 8-10 years. We use the LG brand compressor - the service life is up to 8-10, the manufacturer of the integrity dehumidifier, use the rest assured.

7. Select real data for industrial use: reject false targets. The data is measured by precision experiments, please feel free to purchase.

8. The fuselage stainless steel sheet: durable and not rust.

9. Anti-corrosion: with anti-corrosion function.

Hot Tags: industrial pool dehumidifierChina, manufacturers, suppliers, factory, wholesale