Constant Temperature And Humidity Unit

Constant Temperature And Humidity Unit

Technical Data for 50Liter

Constant Temperature And Humidity Unit for Electronic Workshop

The environmental production requirements of the electronics production workshop are more stringent, especially in the control of temperature and humidity, and can not be taken lightly. If the humidity control is not careful, it will present defective products, so many electronics factories pay great attention to the range of humidity. The exact humidity of the electronics factory is inseparable from the dehumidifier and humidifier.

First of all, let us know that the electronics factory is afraid of static electricity. The impact and loss of the static electricity to the electronics factory are very huge. The electrostatic discharge phenomenon can be seen everywhere in many electronics factories. If it is not paid attention, it will lead to static electricity flooding. . In the electronics factory workshop at room temperature of about 20 degrees Celsius, if the relative humidity is 10% RH, the static voltage generated in the workshop can reach 20,000 V. To change the indoor humidity and reduce static intrusion, just use a humidifier.

When the indoor relative humidity is increased to 20% RH, the static voltage in the workshop drops by 10,000 V, and then the air humidity is continuously increased, and the static electricity is gradually reduced until it disappears. The humidity has a great influence on the product quality. On the other hand, it is still the humidity that disturbs the quality of electronic products. We know that the damage caused by the wetness of electronic products during storage is also not uncommon.

Generally speaking, it is suitable to maintain the humidity of the electronics factory workshop between 40% and 60% RH. The Constant Temperature And Humidity Unit can effectively eliminate the static disturbance and keep the humidity of the electronics factory production environment within a reasonable range. . Using a dehumidifier, we can maintain the humidity in the storage workshop and avoid the harm of the wet product. In any case, we have seen that humidity is always a more important environmental condition in all the conditions of producing electronic equipment.

In the meantime, humidity is still one of the important control contents in the modern industrial production process. The Constant Temperature And Humidity Unit can be used in one machine. With dehumidification function, humidification function, set humidity, when the room humidity value is higher than the set humidity value, the computer board control system will start the machine dehumidification function module to dehumidify, dehumidified water is actively discharged through the drain pipe to reach the set When the humidity value is set, it will stop actively; when the climate is dry and the set humidity value is lower than the humidity value, the computer board control system will start the humidification function module to humidify, and the humidified water source should be connected to the machine for 4 points inlet pipe. When the set humidity value is reached, it will stop actively; ensuring better humidity is the guarantee for the smooth production of the enterprise.

For more details, please kindly contact our project development manager as below: sales@conloon.com

Hot Tags: constant temperature and humidity unitChina, manufacturers, suppliers, factory, wholesale