Ultrasonic Cold Air Humidifier

Features:

. Low operation noise

. High efficiency, over 95%

. Compact design, easy to be move and install

. Rare malfunction, simple to be maintained

. <5&mu;m water mist, quickly combine with air, no water droplet

. High accuracy humidity sensor, LED display, automatic humidity control

. Automatic water-lack protection and alarm

. Water level protection, automatic watering

. 304 stainless steel casing

. Bottom castors, easy to move about

Our ultrasonic humidifiers are controlled automatically.

1. You can set the RH to be 80% for example. When the humidity reaches 80%, our machine will stop working, when the humidity can not reach 80%, our humidifier will start to work automatically.

2. It can be controlled by timer. From 1-24 hours.when you set 12 hours for example. The machine will stop working after 12 hours.

Parameters:

Detailed Images

How to control the humidity of workshops and warehouses in the printing house in winter

With the continuous advancement of technology, printing has been liberated from the original manual labor, and all of them have been fully automated, and many companies have used electronic lasers for printing, which has greatly accelerated the development of the printing industry. Previously, the problem of manual printing was poor efficiency. In the movable type printing stage, uneven coloring appeared. These problems were solved with automatic printing, but the development of technology brought new problems, that is, air humidity to printing. The influence has become a mountain that cannot be circumvented by the printing industry. If this problem cannot be solved, then printing efficiency and product quality will be difficult to improve.

Practice has proved that the most suitable air humidity range for printing production is between 55% RH and 65% RH. Printing companies must provide a relatively stable temperature and humidity environment for printing production to ensure the smooth quality of printing and production. However, the printing environment is constantly changing. The time for printing production under natural conditions is one of the few in a year, so it is very important to control the air humidity in the production environment.

Because of the weather in winter, the air is very dry. In many cases, the air humidity in the printing environment is below 30% RH. We know that this is the best condition for the occurrence of static electricity, and the paper adsorption that affects the printing production in printing production. The phenomenon of deformation, adhesion, reprinting, overprinting, etc. is caused by static electricity, so the elimination of static electricity has become a prerequisite for the smooth production of the printing factory. Many factors, because they do not know how to eliminate static electricity, lead to a decline in printing efficiency, increased scrap, and bring great economic losses to enterprises.

This year, the country issued the most stringent environmental regulations in history. Since July, the price of paper has been rising. If the company's scrap rate is high, it will be difficult for the printing company to make money this year. If it fails, it will close down. It can be said that the next day of the printing factory will be very sad. To survive, we must ensure the printing efficiency and product quality, and improve the pass rate, so that we can survive. Therefore, the elimination of static electricity has now become an important task for the survival of printing companies.

In fact, static electricity is very good to eliminate, because it appears in a dry environment, so increasing the air humidity is the main way to solve the printing process problems, and the method of increasing the air humidity is to use the humidifier, but also must control the air humidity, The humidification should not exceed 65% RH, otherwise the printing will result in inaccurate color registration due to humidity.

In order to eliminate the influence of static electricity on printing in the winter, it is necessary to use a humidifier. Only in this way can the printing production be carried out smoothly. The humidifier produced by CONLOON Electric Appliance adopts ultrasonic atomization technology to uniformly humidify the air in a short time, thereby eliminating the drying hazard such as static electricity, and providing a good production environment for printing production.

Hot Tags: ultrasonic cold air humidifierChina, manufacturers, suppliers, factory, wholesale