+86-13819126663
High Output Ultrasonic Humidifier

High Output Ultrasonic Humidifier

The High Output Ultrasonic Humidifier uses ultrasonic high-frequency oscillation to atomize the water into ultra-fine particles, and diffuses the water mist into the air through the air moving device, thereby achieving the purpose of uniformly humidifying the air.

Description


high output ultrasonic humidifier

The High Output Ultrasonic Humidifier uses ultrasonic high-frequency oscillation to atomize the water into ultra-fine particles, and diffuses the water mist into the air through the air moving device, thereby achieving the purpose of uniformly humidifying the air.

Advantages: large humidification, uniform humidification, high humidification efficiency, energy saving, long service life.

Note: It requires high water quality. If the water quality is hard, there will be water sediment and scale. The sediment in the water will damage the furniture and home appliances.


Product Detail

Model

JDH-48Z

Capacity 

48L/hr

Voltage 

220V/50HZ

Power input

4800w

Air volume

960m³/h

Fog outlet

3pc 110mm 

Work temp

0°C -40°C 

N.W(kg)

130

G.W(kg)

165

Machine size

860*720*650mm

Packing size

972*782*682mm

Applying area 

550-600 m2 

Loading quantity

30pcs/20ft


Features

a. Our ultrasonic humidifiers are controlled automatically.

    1. You can set the RH to be 80% for example. When the humidity reaches 80%, our machine will stop working, when the humidity can not reach 80%, our humidifier will start to work automatically.

   2. It can be controlled by timer. From 1-24 hours.when you set 10 hours for example. The machine will stop working after 10 hours.

b. Digital humidity controller can be randomly set from 1%-98%.Its control precision reaches ±5%

c. It is stainless steel body,nice looking and long time service life. 

d. We accept OEM order.

e. Bulk order will be favorable


Our Products

desiccant dehumidifierhome dehumidifierindustrial humidifier

hand-push dehumidifierindustrial dehumidifiermist maker


The temperature and humidity of the tobacco production workshop, cigarette packaging, tobacco warehouse and other cigarette production environments must be strictly controlled, and the following points must be achieved.

First: When storing tobacco leaves, it is generally required that the storage place be dry, sealed, clean, not exposed to direct sunlight, and not directly affected by changes in temperature and humidity. Waterproof measures are taken at the bottom and around the floor, and can be stored overhead at a position 40 cm above the ground.

Second: the tobacco leaves of different heats and different parts should be stacked separately and clearly marked to facilitate grading and delivery. When stacking, the tip of the leaf is inward and the base of the leaf is outward, and the layers are stacked and tidy. After stacking, cover it with plastic film, burlap, etc., and cover the shade. The height is no more than 1.5 meters. The length and width are determined according to the actual situation.

Three: Regular inspections. The temperature inside the stack should be controlled below 35 °C. Usually, the temperature of the stack and the moisture status of the tobacco leaves should be checked once every 4-6 days. When the temperature exceeds 37 °C, the temperature must be turned over and the smoke leaves should be taken out in time.



Hot Tags: high output ultrasonic humidifierChina, manufacturers, suppliers, factory, wholesale

Send Inquiry

(0/10)

clearall