Mist Humidifier

ULTRASONIC HUMIDIFIER

Ultrasonic humidifier adopts energy-saving atomization module; intelligent computer control design; safe double water level automatic control, effectively improved

The atomization and humidification performance of the equipment enables the atomized particles to be controlled at about 1 to 5 microns, achieving the energy-saving goal of atomization and humidification.

WORKING PRINCIPLE OF ULTRASONIC HUMIDIFIER

The ultrasonic humidifier adopts the principle of ultrasonic high-frequency oscillation to atomize water into ultrafine particles of 1-5 micrometers, and diffuses the water mist into the air through the air moving device, thereby achieving the purpose of uniformly humidifying the air. The utility model has the advantages of large humidification intensity, uniform humidification and high humidification efficiency;

CHARACTERISTICS OF ULTRASONIC HUMIDIFIER

1. High humidification efficiency (close to 100%), high humidification intensity, small and uniform fog particles, and can quickly reach the required relative humidity per unit time, saving water source;

2. The energy consumption index of unit humidification is low. The energy consumption of ultrasonic humidifier is only 0.05 kW/(kg.h), which is only equivalent to 1/10~1/15 of other humidification methods, and the daily running cost is low;

3. small size, can be self-contained according to the site conditions, not only suitable for the installation of new plants, but also can be upgraded and upgraded on the basis of not destroying the original equipment;

4. evenly humidified, can quickly and extensively solve practical problems in industrial production, such as flying flowers, broken ends, static electricity, rough roughness and fiber fragility in textile production;

5. The atomization assembly adopts integrated atomization movement. The fully sealed structure design achieves the purpose of waterproofing, and the replacement and maintenance of the atomization sheet can be solved immediately on site, completely eliminating the early damage of the ultrasonic humidification system and short life. And maintenance problems;

6. The integrated atomization movement has its own water protection device, which can effectively ensure that the atomization movement automatically stops when the water level is too low, no need to equip the equipment, and saves the cost;

7. The control method is flexible and convenient. There are three control modes to choose from: switch control, timing control and humidity automatic control. Flexible selection and matching can be made according to the site environment and personnel arrangement when selecting;

8. Humidifier with automatic humidity control is equipped with imported humidity sensor from France. It has high sensitivity and quick response. It can completely realize the operation of no personnel on site. 

9. The equipment is made of stainless steel, which is beautiful in appearance, corrosion-resistant and has a long service life.

10. The equipment has both fixed bracket type and movable type, and can be installed in the area away from the humidification place through the pipeline connection, which not only facilitates the installation of the equipment, but also improves the use efficiency of the space;

11. The equipment is tested by the national electrical safety use, equipped with high-performance automatic water supply solenoid valve, overflow and drain, easy to use, safe and reliable;

12. The overall design of the equipment has been tested repeatedly and tested for many years. It has a compact structure and reasonable matching. There is no high-power motor. It is not driven by pure mechanical energy. Therefore, there is no noise during operation and high atomization effect on liquid.

PRECAUTIONS OF ULTRASONIC HUMIDIFIER

1. the initial use should be placed at room temperature for half an hour before using.

2. The ambient temperature is less than 10-40 degrees.

3. Use clean water with a temperature below 40 degrees.

4. Keep away from other home appliances when the machine is working. 

5. Do not add non-professional production lines or supervised additives to the water.

6. Do not place the humidifier on a hollow object to avoid co-frequency resonance noise.

7, do not boot in the waterless state.

ULTRASONIC HUMIDIFIER MAINTENANCE

1. Ultrasonic uses a high-quality humidifier, no lubrication, except for the user's regular cleaning according to their own use environment, the motor part does not require special maintenance.

2. Cleaning: Under normal circumstances, the working environment of the humidifier contains fiber or dust, so the user should clean it regularly according to his own environment, and the time is usually half a year or one year.

3. Turn off the main power of the humidifier first, pull out the power cord, remove the air filter at the bottom, clean the non-woven filter net with compressed air or vacuum cleaner, or put it in warm water and wash it with detergent.

4. Since the machine is equipped with a flushing device, the water storage tank generally does not need to be cleaned.

5. The atomizer part needs to be taken out from the humidifier. First remove the inner and outer guides, clean the fan impeller and the air separator, and do not let the dust fall into the storage tank from the vertical direction of the separator. When cleaning the atomizer, the air separator should be taken out together with the atomizer. When placing it, it must be placed horizontally. Do not place the water absorber, the water impeller and the upper fan impeller on the ground to prevent the motor shaft from deviating, resulting in bearing damage and shortening. Service life.

Hot Tags: mist humidifierChina, manufacturers, suppliers, factory, wholesale