Water Fountain Pond Fog Maker

Parameters:

Warm tips:

a. Please use clean water instead of dirty water, and the water can not be very hard. Less calcium.

b. Draining the water in the tank if you do not use it for long time.

c. Clean the mist module often with soft brush and clean water.

d. If the fog is decreasing, we suggest you replace the mist modules.

Principle of ultrasonic atomization

A piezoelectric ceramic sheet (commonly known as an ultrasonic atomizing sheet) is mounted on the bottom of a water container, and a driving voltage generated by a driving control circuit that is equal to the resonant frequency of the atomizing sheet is applied to the atomizing sheet, and the atomizing sheet is generated. Oscillation energy. The oscillating energy propagates in the water in a direction perpendicular to the surface of the atomizing sheet. At a suitable water depth, the water surface on the energy propagation axis is concentrated to swell a water column, and a large number of tiny tension waves are concentrated at the front end of the water column, so that the water surface is raised. The surface tension is greatly reduced, and the water surface is split into many minute regions by the wavelength of the surface tension wave. Each region appears to be a single particle independently of each other as if it does not adhere to each other, and it is emitted into the air to form a fog. This is Ultrasonic atomization principle.

Since the operating frequency of the piezoelectric ceramic piece is in the ultrasonic frequency range, we call this atomization atomization ultrasonic atomization, which is referred to as ultrasonic atomization.

Ultrasonic nebulizer is a component that uses ultrasonic atomization principle to work. Because it is usually used as the core component of humidification machine, it is also called ultrasonic atomization accessory.

Products shows

Hot Tags: water fountain pond fog makerChina, manufacturers, suppliers, factory, wholesale