Latest Products
Contact Us
- No.116, Changda Rd, Yuhang District, Hangzhou, Zhejiang, China
- eva@conloon.com
- +86-571-81600072
Description
Company Information:
Our factory is mainly producing humidity control equipments, like mist makers, humidifiers and dehumidifiers. We have over 100 employees, among them there are 21 technicians who has more than 15 years working experience in this field. We have 4 production lines and our annual production capacity can reach to 500,000units.
1. Composition
1)Mist maker outside case
2)Fixed hole
3)Positive power supply
4)Negative power supply
5)Water level sensor
6)Indicate light
7)Mist plate
8)Metal pressure ring
9)Sealing ring
2. Features
Easy to install
Special design
Easy to replace the ceramic disc
Economical and practical
CE approved
3. Parameters
| Model | CL-MK10-7 |
| Dimension | 270x90xH30mm |
| Water level sensor switch | H25mm |
| Ceramic disc | dia. 20mm |
| Wire | 1.5m |
| Working voltage | DC 48V |
| Current | 4.5-4.8A |
| Power | 300W |
| Housing material | 304 Stainless Steel |
| Working Temperature | 5-55 ℃ |
| Service life | 5000 hours |
| Humidity capacity | 7L/Hr |
| N.W | 1.7 KG/PC |
| G.W | 1.8 KG/PC |
| Unit packing dimension | 310x90x110mm/pc |
| Packing carton dimension | 450x360x270mm/10pcs |
4. Product Display:
5. Mist Maker TroubleShooting:
Breakdown Case One: Connect the power supply, the indicator light is on, but no mist spray out
Analysis of causes:
◆The water is not enough. The water level is not above the water sensor.
◆The water sensor is damaged or the ceramic disc is broken
Solution:
▲Fill in more water until the mist spray out
▲Repair the water sensor or change the ceramic disc
Breakdown Case Two: Connect the power supply, the indicator light is off, and no mist spray out
Analysis of causes:
◆The power supply and mist maker is connected wrong
◆The power supply is damaged
Solution:
▲Reconnect the mist maker and power supply correctly
▲Change the new power supply
Breakdown Case Three: Connect the power supply, there's only water column, but no mist
Analysis of causes:
◆The water quality is bad, there are oil in the water
◆The water level is too high
◆There is too much scale accumulated on the ceramic disc
Solution:
▲Use clean tap water
▲Keep the water level above the water sensor about 1.5cm
▲Clean the ceramic disc or change new ceramic disc
Contact Us:
We are professional manufacturer for humidity control products, especially in humidifiers and dehumidifiers.
Feel freely to contact us and send inquiry to: sales@conloon.com
Hot Tags: 10 disc mist makerChina, manufacturers, suppliers, factory, wholesale
You Might Also Like
